Filter
Top Products
Playback Controls
RT-10
4-29
Frame + Time
Activates playback at the selected playback time (minutes:seconds)
in the currently playing frame. This search mode is not available
unless playback or pause mode is activated.
Page
Activates playback at the selected browsable picture on the loaded
disc. This search mode is not available unless the loaded disc
includes browsable pictures.
To activate search mode:
1. Press the remote control SEARCH button to open one of the
search bars shown above at the top of the on-screen display.
• The Time and Frame + Time search modes are not available
unless playback or pause mode is activated.
• The Search bar indicates the selected search mode.
2. When the search bar opens, press the SEARCH button again to
cycle through all search modes available for the loaded disc.
The table on page 4-12 indicates the search modes available
for each disc format.
Note:
The search bar automatically closes a few seconds
after the last command is received. When this occurs,
search mode is automatically deactivated.
4. When the desired search mode is selected, press the remote
control number buttons to enter a search value. It is not
required to press the +10 button (2-15) to enter values 10 and
above. For example:
• To enter Title 6, press the number 6 button.
• To enter Track 16, press the number 1 button, then the
number 6 button.
• To enter a playback time of 16 minutes and 16 seconds,
press the number 1 button, the number 6 button, the
number 1 button, then the number 6 button.
• Press the remote control CLEAR button to delete an
incorrect search value.
• To deactivate search mode, press the SEARCH button until
the search bar closes.
. . . Search Mode continues on page 4-30
Title : 1
Chapter : 1
Group : 1
Track : 1
Page : 1
Time : 0.00
Time + Frame : 0.00 00