Filter
Top Products
Basic Operation
RT-10
2-7
11.
Indicates that the second character
on the character display (previous
page) is a track number.
12.
Indicates that the last three characters
on the character display (number 1)
represent the remaining playback
time.
13.
Indicates that the last three characters
on the character display (previous
page) represent the total playback
time.
14.
Indicates that playback (4-11) is
activated.
15.
Indicates that pause mode (4-15) is
activated.
16.
Indicates that repeat playback (4-19)
is activated.
TOTAL
REMAIN
TRK
17.
Indicates that playback of the video
portion of the loaded disc is in
progress.
18.
Indicates that playback of a scene
recorded from multiple camera angles
is in progress. Refer to page 4-9 for
information.
19.
Indicates that last memory playback
(4-13) is activated.
20.
Indicates that preferred disc settings
have been stored for the loaded
disc. Refer to page 4-10 for more
information.
21.
Indicates that the RT-10 video output
connectors are deactivated. The
remote control VIDEO ON/OFF
button can be used to activate and
deactivate all RT-10 video output
connectors.
V OFF
COND
LAST
V
-
PART
22.
Indicates that the RT-10 component
video output connectors are passing
progressive-scan (non-interlaced)
video signals.
23.
Indicates that the RT-10 digital audio
output connectors are deactivated.
The Digital Out parameter (3-14) can
be used to activate and deactivate all
RT-10 digital audio output connectors.
24.
Indicates that the Audio Out parameter
(3-16) is set to 5.1 Channel.
25.
Indicates that the Audio Out parameter
(3-16) is set to 2 Channel.
26.Sample Rate Indicator
Indicates that a 192kHz or 96kHz
source is present. The sample rate –
192kHz or 96kHz – appears in red.
. . . Front Panel Display Indicators continues on page 2-8
DOWN MIX
5.1 CH
D OFF
PROGRESSIVE