Lexicon RT-10 CD Player User Manual


 
Playback Controls
Lexicon
4-14
RESUME MODE
The front panel and remote control Stop button can be used
to activate resume mode, which pauses playback at the current
playback time. Later, playback can be reactivated from this
playback time.
Audio automatically mutes when resume mode is activated.
To activate resume mode:
When playback is activated, press the Stop button. The Resume bar
shown below will open at the top of the on-screen display to
indicate that resume mode is activated.
If the Resume bar does not appear on the on-screen display,
resume mode might not be available for the loaded disc. The
table on page 4-12 indicates the playback modes available for
each disc format.
STOP
STOP MODE
The front panel and remote control Stop button can be used
to activate stop mode, which stops playback of the loaded disc.
In some cases, the Stop button must be pressed twice in
succession to activate stop mode.
When an MP3 is loaded, activating stop mode does not
deselect the selected folder unless random playback or program
mode is activated.
Audio automatically mutes when stop mode is activated.
To activate stop mode:
When playback is activated, press the Stop button. In some cases,
the Stop button must be pressed twice in succession to activate
stop mode. When stop mode is activated, playback cannot be
reactivated at the current playback time.
STOP
Resume
To deactivate resume mode:
Press the Play button to reactivate playback at the current
playback time.
Press the Stop button to activate stop mode. When stop mode
is activated, playback cannot be reactivated at the current
playback time.