Getting Started
RT-10
1-3
HIGHLIGHTS
• DVD-V, DVD-A, and DVD-RW/R compatibility
• SACD compatibility
• Audio CD, CD-RW/R, Video CD, and SVCD compatibility
• 12-bit/108MHz D/A video conversion
• Progressive-scan component video output on BNC, RCA, or
Mini-D Ribbon connectors
• True 3:2 pull-down for the finest film-based DVD reproduction
• Video Adjust for exact, detailed adjustment of video settings
• Six Video Adjust banks, including three preset banks and three
memory banks for user-defined settings
• 24-bit/192kHz D/A audio conversion
• Digital audio output on S/PDIF coaxial, S/PDIF optical, or
AES/EBU connectors
• Still Frame, Frame-by-Frame, Slow, Random, Repeat, and
Program playback modes
• Shortcuts for up to 5 frequently adjusted controls
• Stored disc settings for up to 15 discs
• MP3 and MPEG compatibility
• Composite and S-video output
• Video and audio output on Euro or Peritel (TV A/V) connector
• Trigger input connector
• IR input connector
• Intuitive, customizable user-interface
• Setup Navigator
• Optional 19-inch rack mount kit
PRODUCT REGISTRATION
Please register the RT-10 within 15 days of purchase. To do so,
register on-line at www.lexicon.com or complete and return the
Product Registration card attached to the back cover of this user
guide. Product registration serves no warranty purposes. Retain the
sales receipt as proof of warranty coverage.
INSTALLATION CONSIDERATIONS
The RT-10 requires special care during installation to ensure optimal
performance. Pay particular attention to the bulleted items that
begin below and to other precautions that appear throughout this
user guide.
Before moving the RT-10, make sure the disc drawer is empty
and the RT-10 is powered off with the front panel On/Off
button. Then, make sure the power cord is disconnected from
the wall outlet and that other cables are disconnected from
associated components.
Never lift or move the RT-10 during playback. Discs rotate at
high speeds inside the player. Movement might damage the
disc and the player.
CAUTION
DO . . .
• Install the RT-10 on a solid, flat, level surface such as a table or
shelf or in a standard 19-inch equipment rack. An optional
rack-mount kit is available from authorized Lexicon dealers.
• Select a dry, well-ventilated location out of direct sunlight.
. . . Installation Considerations continues on page 1-4