Filter
Top Products
Playback Controls
RT-10
4-9
CAMERA ANGLES
• Pressing the remote control ANGLE button opens the Angle
bar shown below, which can be used to select the desired
camera angle.
• Camera angle selection is available for DVD-V scenes recorded
from multiple camera angles. Camera angle selection is not
available for other disc formats or for DVD-V scenes recorded
from one camera angle. In addition, camera angle selection is
not available unless playback is activated.
• The Angle Indicator parameter (3-35) activates and deactivates
the indicator. When set to On, the indicator appears on
the front panel display when playback of a scene recorded
from multiple camera angles is in progress. When set to Off,
the indicator does not appear on the front panel display
when playback of a scene recorded from multiple camera
angles is in progress.
To select a camera angle:
1. When playback is activated, press the ANGLE button to open
the Angle bar shown below.
• The Angle bar indicates the number of the selected camera
angle and the number of camera angles from which the
currently playing scene was recorded For instance, the
Angle bar shown below indicates that camera angle 1 of 2
is selected.
ANGLE
• If the Angle bar indicates that camera angle 1 of 1 is
selected, the currently playing scene was recorded from
one camera angle. In this case, camera angle selection is
not available.
• If the Angle bar does not open at the top of the on-screen
display, camera angle selection might not be available for
the loaded disc.
2. When the Angle bar opens, press the ANGLE button again to
cycle through all camera angles available for the currently
playing scene. The remote control number buttons can also be
used to enter the number of the desired camera angle (if
known).
Note:
The Angle bar automatically closes a few seconds
after the last command is received. If this occurs,
playback will automatically activate from the selected
camera angle.
3. When the desired camera angle is selected, press the Play
button or the remote control ENTER button to activate
playback from the selected camera angle.
Angle :1/2