Filter
Top Products
Navigating the Default Web Page
The Annotator 300 default web page has six sections: Communication Settings,
Input/Output Status, Date/Time Settings, Configure This
Device, Device Info, and Passwords.
When logged in as an administrator, configuration of some of the device settings is
possible by clicking on the applicable buttons. See the individual sections for details.
NOTE: When logged in as a user the web page is displayed as read-only. All buttons
are grayed out and not available.
Figure 54. Annotator 300 Web Page
At the top left corner of the web page the current installed firmware build is shown. At the
bottom right corner, the current web page build is shown (for example, DWP v0.00.21).
Communication Settings
This section displays the current TCP/IP and RS-232 settings.
Figure 55. Communications Settings Section
Annotator 300 • Accessing the Web Page 93