Filter
Top Products
Using the Command/Response Table for IP SIS Commands
Symbol Definitions
•
= Space
X10! = Specific port number (01-99), 00 = reserved
X10% = On/off status: 0 = off/disable; 1 = on/enable
X11!
= Version number (listed to two decimal places)
X11@
= Text string up to 63 characters drawn from the alphabet (A-Z), digits (0-9), minus
sign/hyphen (-). No blank or space characters are permitted as part of a name. No
distinction is made between upper and lower case. The first character must be an alpha
character. The last character must not be a minus sign/hyphen.
X11#
= Time and date (for set) In the format: MM/DD/YY•HH:MM:SS where:
MM = month: 01 (January) through 12 (December), DD = 01 through 31, YY = 00
through 99, HH = 00 through 24, MM = 00 through 59, SS = 00 through 59
X11$
= IP address: (###.###.###.###). Leading zeros in each of 4 fields are optional in
setting values, and are suppressed in returned values.
X11*
= Hardware (MAC) address: ##-##-##-##-##-##
X11( = Subnet mask (xxx.xxx.xxx.xxx). Leading zeros are optional in setting values in each
of four fields, and are suppressed in returned values. Default subnet mask = 255.255.0.0
X12@
= Verbose mode: 0 = clear/none (default, Telnet), 1 = verbose mode (default,
RS-232/RS-422), 2 = tagged responses for queries, 3 = verbose mode/tagged for
queries.
NOTE: If tagged responses are enabled, all read commands return the constant string
and the value as the set command does (for example, the read processor name
command
E
CN
}
, returns Ipn•
X10)]
).
X13# = Password (12 characters = maximum length; no special characters are allowed.)
NOTE: A user password cannot be assigned if no administrator password exists;
the E14 error code is returned. If the administrator password is cleared, the user
password is also removed.
X14!
= Reading Password: RS-232 connection responds with password. IP connection
responds with 4 asterisk (****) if password exists and empty if not, instead of actual
password.
X14(
= Default name, (Annotator-300 + last 3 pairs of the MAC address)
X16(
= Time-out in 10 second steps,, 1-65000 (default = 30 = 30 seconds)
Annotator 300 • SIS Communication and Control 57