Filter
Top Products
Accessing the Web
Page
This section describes how to access the default web page and the web page contents.
The web page is is always available and cannot be erased or overwritten. Topics that are
covered here are:
• Accessing the Default Web Page
• Navigating the Default Web Page
Accessing the Default Web Page
Access the Annotator 300 on-board web page as follows:
1. Double click the web browser icon on the PC desktop to launch the web browser.
2. Click in the browser’s Address field.
3. Enter the unit’s IP address in the browser’s Address field.
NOTE: If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
4. To have the browser to display a page other than the default page (such as a custom
page that you have created and uploaded), enter a slash (/) and the file name to open.
NOTE: The browser Address field should display the address in the following
format: xxx.xxx.xxx.xxx/{optional_file_name.html}
The following characters are invalid in file names: {space} ~ @ = ‘ [ ] { } < >
’ “ ; : | \ and ?.
5. Press the keyboard <Enter key>. The device checks to see if it is password
protected.
If password protected, the Annotator 300 downloads the Connect to (IP
address) page. If it is not password protected, proceed to step 7.
6. Click in the Password field and type in the appropriate administrator or user name
and password.
7. Click OK.
Annotator 300 • Accessing the Web Page 92