Filter
Top Products
1. Click the TCP/IP tab, and in the IP Address field, enter the IP address of the desired
device.
2. If required, enter the device password in the Password field.
NOTE: Check the Show Characters check box to have the password characters
visible when entering them.
3. In the Telnet Port field, enter the Telnet port of the desired device.
4. Click the Connect button. A new device tab opens.
Offline Device Preview
It is possible for the Annotator 300 pages to be viewed without connecting directly to a
device, but the settings cannot be changed or saved.
To open an offline device, click on the drop-down arrow and select New
Configuration File. The New Configuration File dialog box opens.
Figure 24. Start-up Drop-down Menu
Figure 25. New Configuration File Dialog Box
1. Select the Annotator 300 device model from the Device Models list.
2. Click the Configure button. A new offline device configuration tab opens.
NOTE: Until a connection to an online device is made, all the pages are grayed out
and configuration options are not available.
Annotator 300 • Product Configuration Software 66