Filter
Top Products
Command ASCII (Telnet)
(host to processor)
URL Encoded (Web)
(host to processor)
Response
(processor to host)
IP setup commands
Set unit name
EX11@CN} WX11@CN| Ipn•X11@]
Set unit name to factory
default
E•CN} W%20CN| Ipn•X14(]
Read unit name
ECN} WCN|
X11@]
Set time/date
E X11#CT} W X11# CT| Ipt•X11#]
Read time/date
E CT} WCT| X11#]
Set DHCP on
E1DH} W1DH
|
Idh1]
Set DHCP off
E0DH} W0DH
|
Idh0]
View DHCP mode
EDH} WDH
|
IdhX10%]
Set IP address
E X11$CI} WX11$CI
|
Ipi• X11$]
Read IP address
ECI} WCI
|
X11$]
Read hardware
address (MAC)
ECH} WCH
|
X11*]
Set subnet mask
E X11(CS} WX11(CS
|
Ips•X11(]
Read subnet mask
ECS} WCS
|
X11(]
Set gateway IP address
E X11$CG} W X11$CG
|
Ipg•X11$]
Read gateway IP address
ECG} WCG
|
X11$]
NOTE: Changes made to any Ethernet settings do not take effect until the reboot networking command (2BOOT) is issued.
Reboot network
E2BOOT} Boot2]
NOTE: X10% = On/off status: 0 = off/disable; 1 = on/enable
X11@
= Text string up to 63 characters drawn from the alphabet (A-Z), digits (0-9), minus sign/hyphen (-). No blank or space characters are permitted as
part of a name. No distinction is made between upper and lower case. The first character must be an alpha character. The last character must not
be a minus sign/hyphen.
X11#
= Time and date (for set) In the format: MM/DD/YY•HH:MM:SS where: MM = month: 01 (January) through 12 (December), DD = 01 through 31,
YY = 00 through 99, HH = 00 through 24, MM = 00 through 59, SS = 00 through 59
X11$
= IP address: (###.###.###.###). Leading zeros in each of 4 fields are optional in setting values, and are suppressed in returned values.
X11*
= Hardware (MAC) address: ##-##-##-##-##-##
X11( = Subnet mask (xxx.xxx.xxx.xxx). Leading zeros are optional in setting values in each of four fields, and are suppressed in returned values. Default
subnet mask = 255.255.0.0.
X14(
= Default name, (Annotator-300 + last 3 pairs of the MAC address)
Annotator 300 • SIS Communication and Control 59