Filter
Top Products
Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
Power Save
Power save OFF
E0PSAV} Psav0]
Default: runs in full power mode, the
product will always output video.
Power save ON
E1PSAV} Psav1]
ANNOTATOR 300 enters low power
state that can only be exited via
E0PSAV} command, or front
panel button press
View setting
EPSAV} X6@]
View current power save status.
USB device status
Enable USB device
EX5(*1ADEV} AdevX5(*1] Enable USB device X5(.
Disable USB device
EX5(*0ADEV} AdevX5(*0] Disable USB device X5(.
View setting
EX5(ADEV} X1)]
View current USB device status.
View USB device
information
45i} Inf45*X5(*X5#
*<calibration
status>*<device
ID>]
View details about last moved/touched
USB device
Network Printer
Network printer
Enable network printer
EE1PRTR} PrtrE1]
Enable Network Printing when the
capture button is triggered.
Disable network printer
EE0PRTR} PrtrE0]
Disable Network Printing (default).
View setting
EEPRTR} X1)]
View network printer setting
Printer URI option
Set URI option
EUX6*PRTR} PrtrUX6*] Sets the printer URI to X6*.
View setting
EUPRTR} X6*]
View printer URI setting
Example: E U lpd://10.13.1.22 PRTR }
NOTE: “lpd” must be lower case
Printer quantity
Define printer quantity
EQX7(PRTR} PrtrQX7(] Defines number of copies to print (X7()
when image is captured.
View setting
EQPRTR} X7(]
View the current number of copies to
print.
NOTE:
X1)
= off/disable (0), on/enable (1)
X5#
= Line color, 6 bit RGB, 64 total colors (see page 38 for full details)
X5( = All ports (0), USB device (1-64)
X6@ = Power Save modes; 0 = Full Power mode (Default), 1 = Low Power state
X6* = Printer URI address, Example: lpd://10.13.1.22
X7( = Number of copies to print (printer quantity): 1-50 (default = 1)
Annotator 300 • SIS Communication and Control 49