Filter
Top Products
Ping to determine Extron IP address
The ping utility is available at the command (Cmd) prompt. Ping tests the Ethernet
interface between the computer and the Annotator 300. Ping can also be used to
determine the actual numeric IP address from an alias and to determine the web address.
Ping the device as follows:
1. From the Windows Start menu, select Run... . The Run window opens.
2. In the Open text field, enter command.
3. Click OK. A DOS command window opens.
4. At the DOS prompt, enter ping IP address (for example, 10.13.197.37). The
computer returns a display similar to the figure below.
The line Pinging ... reports the actual numeric IP address, regardless of whether
you entered the actual numeric IP address or an alias name.
Figure 67. Ping Response
Ping to determine web IP address
The ping utility has a modifier, -a, that directs the command to return the web
address rather than the numeric IP address.
At the DOS prompt, enter ping -a IP address. The computer’s return display
is similar to the ping response shown in figure above, except that when you specify
the -a modifier, the line Pinging mail... reports the web IP address instead of the
numeric
IP address, regardless of whether you entered the actual numeric IP address or an
alias name.
Connect as a Telnet client
The Telnet utility is available from the command prompt. Telnet allows you to input SIS
commands to the Annotator 300 from the PC via the Ethernet link and the LAN.
Access the prompt and start Telnet as follows:
1. From the Windows Start menu, select Run... . The Run window opens.
2. In the Open text field, enter command.
3. Click OK. A command window opens.
Annotator 300 • Ethernet Connection 100