Filter
Top Products
Configure This Device
This section allows the user to install the device configuration software, PCS.
Figure 60. Configure This Device Section
To configure the device, click on the link and install the software. Follow the embedded
help file instructions for device configuration.
Device Info
This section display the device information. It also gives access to update the installed
device firmware.
Figure 61. Device Info Section
To edit the device name click on the Edit button. The Device Name dialog box opens.
Figure 62. Device Name Dialog
Enter a suitable name for the device and click the Apply button to accept the pending
changes.
Clicking the Cancel button cancels any pending changes and closes the dialog box.
Clicking the Reset to Default button resets the device to the factory default device
name. Default name, (Annotator-300 + last 3 pairs of the MAC address).
Annotator 300 • Accessing the Web Page 96