Filter
Top Products
Capture/Recall Settings (front panel activated)
A snapshot of the currently displayed image (including annotations) can be captured and
saved to the Annotator 300 memory using the front panel Capture/Recall button, the
Next button, and the two Adjust knobs. This image or any other saved image can then be
recalled and output to the active display at a later time.
To capture an image:
1. Press the Capture button. The LCD displays “To Confirm....Press Next”.
2. Press Next to confirm and to enter the Capture process. The LCD displays
“Capturing Image: <filename>”.
When the image is saved the LCD reverts to the default menu cycle.
NOTE: Custom image names can be used when image captures are initiated
using the appropriate SIS commands.
To Confirm...
Press Next
Step 1
LCD screen displays
Capturing Image
<
filename>
LCD screen displays
Captured
<
filename>
LCD screen displays
Step 2
Press
Press
NEXT
MENU
RECALL
CAPTURE
Figure 13. Sequence for Capturing an Image
Annotator 300 • Operation 22