Filter
Top Products
Edit Comm Settings (hidden)
To display and enter this menu, press and hold the Input 3 button and the Next button
simultaneously. The hidden menu appears.
This menu allows the user to edit the following IP settings:
DHCP mode, IP address, subnet mask, and gateway address.
Exit Menu
At this menu pressing Next exits the menu system and returns to the default cycle.
Figure 8. Annotator Menu System Overview
Input
Configuration
x: Input Type
RGB
Rotate to select
video input type.
Next
x: Film Detect
<Off> On
Rotate to turn
Film Detect on
or off.
Next
x:
H Start V
128 128
Rotate to adjust
Vertical Start value.
Rotate to adjust
Horizontal Start value.
Rotate to adjust
Pixel Phase value.
x:
EDID
1600x1200 @ 60Hz
Rotate to adjust
Total Pixel value
(* = default).
User
Presets
<NA>
Recall Preset
Next
Rotate either to
select a preset to
recall settings.
<02>
Save Preset
Next
Rotate either
to select a preset
to save current
settings to.
Menu
Menu
Output
Configuration
Rotate to adjust
Resolution value
Rotate to adjust
Refresh rate.
x: Resolution
1024x1024 @60Hz
Next
HDMI Format
x: AUTO
Next
Rotate either to
turn Note on or off.
Next
Next
Next
Next
Next
Menu
Advanced
Configuration
Next
Menu
Serial Port
9600 RS232
DHCP Mode
On
MAC Address
005A6003C24
This is set at the factory
and cannot be changed
in “Edit Comm Settings”
menu.
IP Address
192.168.254.254
Gateway Address
000.000.000.000
Subnet Mask
255.255.000.000
View Comm
Settings
Exit Menu
Press NEXT
Menu
Next
Next
Next
Next
Next
Next
Rotate either to
select Yes or No.
Next
Edit Comm
Settings
DHCP Mode
<On>
Rotate either to turn
DHCP mode On or Off.
IP Address
<192>168.254.254
Gateway Address
<000>000.000.000
Subnet Mask
<255>255.000.000
Rotate to select
octet field. Rotate
to change address.
Rotate to select
octet field. Rotate
to change address.
Rotate to select
octet field. Rotate
to change address.
Next
Next
Next
Next
“Hidden” Menu *
NOTE: Press Next to cycle through the submenus.
Press Menu to leave the current menu and go back to
the Main menu.
Rotate either to turn
Auto Memory on or off.
Test Pattern
Color Bars
Rotate either to
select Switch Type
(cut or fade).
Rotate either to
select Capture/Recall
format.
Temperature
96 F 35 C
Factory Reset
Hold Auto Img
Calibrate Panels
<NO> YES
Indicates Internal temperature
(not adjustable).
Press and hold Auto Image
to reset unit to factory settings.
Next
Next
Next
Next
Next
Overscan
S-video 5.0%
Next
Next
x: Aspect Ratio
Fill
Rotate either to select
Aspect Ratio mode.
Next
Picture
Control
Menu
x: H Center V
+00000 +00000
Next
Next
Next
x: H Size V
+01365 +00768
Rotate to adjust
Horiziontal value
Rotate to adjust
Vertical value.
Rotate to adjust
Horiziontal value
Rotate to adjust
Vertical value.
x: Brit Cont
064* *064
Next
Rotate to adjust
Brightness value
Rotate to adjust
Contrast value.
x: Color Tint
064 064
Next
Rotate to adjust
Color value
Rotate to adjust
Tint value.
x: Detail
064*
Rotate either
to adjust Detail
value.
x:
H Active V
1024* *768
x:
Tpix Phase
1344* 16
x: HDCP Note
<Off> On
x: Auto Image
Off
x: Auto Memory
On
Capture/Recall
USB
Switch Type
Fade
Rotate to select
output (1 or 2).
Rotate to select
format.
Rotate either to
select Test Pattern.
Rotate either to turn
Aiuto Image on or off.
Rotate to select
video format.
Rotate to select
value.
*NOTE To activate the hidden menu “Edit Comms”,
press and hold Input 3 and Next button simultaneously.
NOTE: In the images above, the term “x:” refers to an
input or an output number. For example, if selecting
input 2 with HDMI, for
Input Configuration > Input Type,
the display reads:
2: Input Type
HDMI
Annotator 300 • Operation 16