Filter
Top Products
Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
On-screen clock
Enable on-screen clock
EX5^TIME} TimeX5^]
Display the time on the video output.
View settings
ETIME} X5^]
View setting.
On-screen clock horizontal position
Specific value
EKX1^HCTR} HctrKX1^]
Set horizontal position to
X1^
.
Increment to right
EK+HCTR} HctrKX1^]
Shift clock right.
Increment to left
EK-HCTR} HctrKX1^]
Shift clock left.
View settings
EKHCTR} X1^]
Horizontal position value is
X1^
.
On-screen clock vertical position
Specific value
EKX1^VCTR} VctrKX1^]
Set vertical position to
X1^
.
Increment up
EK+VCTR} VctrKX1^]
Shift clock down.
Increment down
EK-VCTR} VctrKX1^]
Shift clock up.
View settings
EKVCTR} X1^]
Vertical position value is
X1^
.
Panel calibration mode
Enter calibration mode
E1PCAL} Pcal1]
Enter touchpanel calibration mode.
Exit calibration mode
E0PCAL} Pcal0]
Exit touchpanel calibration mode.
View setting
EPCAL} X1)]
View calibration setting.
Auto annotation clear
Set annotation clear
EX6(ACLR} AclrX6(] Set auto annotation clear to X6(.
View setting
EACLR} X6(] Annotation clear setting is X6(.
Annotation white/blackboard
Disable whiteboard
E0WHBD} Whbd0]
Disable whiteboard (default).
Enable whiteboard
E1WHBD} Whbd1]
Enable whiteboard
Enable blackboard
E2WHBD} Whbd2]
Enable blackboard (OSD mute button).
View setting
EWHBD} X7@]
View current setting.
NOTE: X1) = off/disable (0), on/enable (1)
X1^ = H or V position (range -11000 to +11000)
X5^ = On-screen clock: 0 = disabled (default), 1 = date and time, 2 = time only, 3 = date only
X6( = Auto Annotation Clear; 0 = Disabled (default), 1 = Clear after an input switch; 2 = Clear after an input
switch or when a new input frequency is detected
X7@ = White/Blackboard status; 0 = Disabled (Default), 1 = Whiteboard is enabled, 2 = Blackboard is enabled
Annotator 300 • SIS Communication and Control 52