Filter
Top Products
Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
Auto-Image threshold value
NOTE: Luminosity value which the processor defines as active video for Auto-Image.
Set threshold value
EX4#ALVL} AlvlX4#]
Set global Auto image luminosity value
X4#.
View threshold value
EALVL} X4#]
View global Auto image luminosity
value X4#.
Horizontal start
Specify a value
EX$HSRT} HsrtX!*X$]
Set horizontal location of first active
pixel in active input.
Increment value
E+HSRT} HsrtX!*X$]
Increase value.
Decrement value
E-HSRT} HsrtX!*X$]
Decrease value.
View value
EHSRT} X$]
View horizontal location of first active
pixel in active input.
Vertical start
Specify a value
EX$VSRT} VsrtX!*X$]
Set vertical location of first active line in
active input.
Increment value
E+VSRT} VsrtX!*X$]
Increase value.
Decrement value
E-VSRT} VsrtX!*X$]
Decrease value.
View value
EVSRT} X$]
View vertical location of first active line
in active input.
Pixel phase (RGB and YUV-HD input signals only)
Specify a value
EX^PHAS} PhasX!*X^]
Set pixel phase to specified value for
active input.
Increment value
E+PHAS} PhasX!*X^]
Increase value.
Decrement value
E-PHAS} PhasX!*X^]
Decrease value.
View value
EPHAS} X^]
View pixel phase.
Total pixels (RGB and YUV-HD only)
Specify a value
EX&TPIX} TpixX!*X&]
Set total pixels to specified value for
active input.
Increment value
E+TPIX} TpixX!*X&]
Increase value.
Decrement value
E-TPIX} TpixX!*X&]
Decrease value.
View value
ETPIX} X&]
View total pixels.
Active pixels
Specify a value
EX*APIX} ApixX!*X*]
Set active pixels to specified value for
active input.
Increment value
E+APIX} ApixX!*X*]
Increase value.
Decrement value
E-APIX} ApixX!*X*]
Decrease value.
View value
EAPIX} X*]
View active pixels.
Command/Response Table for SIS Commands
NOTE: X! = Input selection; 1 – 3
X$ = H/V start — 0 to 255 (default midpoint = 128, translates to the default value in the input lookup tables
X^
= Pixel phase;
0-63 (default = 31)
X&
= Total pixels; (±512 of the default value)
X*
= Active pixels; (±512 of the default value)
X4# = Auto-Image Threshold Value; 0 (black) through 100 (white), default = 25
Annotator 300 • SIS Communication and Control 42