Filter
Top Products
To recall an image:
1. Press and release the Recall button. The LCD displays “Recall Image <None>”.
2. Use either Adjust knob to scroll through the saved images to the desired image.
3. Press Next to Recall the image. The LCD displays “Recalling: <filename>”.
When the image is fully downloaded, the LCD displays the name of the image and
“Recalled”, (for example, “IMG05.bmp Recalled”). The recalled image is displayed on
the active display.
Recall Image
<
None>
Step 1
LCD screen displays
Recalling Image
IMG05.BMP
LCD screen displays
Recalled
IMG05.BMP
LCD screen displays
Step 2
Step 3
ADJUST
Rotate either
Adjust knob.
Recall Image
IMG05.BMP
LCD screen displays
NEXT
MENU
Press
Press
RECALL
CAPTURE
Figure 14. Sequence for Recalling an Image
To remove an image from the display:
1. Press and release the Recall button. The LCD displays “Recall Image <None>”.
2. Press Next. The LCD displays “Recall: <None>”. The current image is removed from
the display, but not from the Annotator 300 memory. To recall the image follow the
steps described in the “To recall an image” section above.
Annotator 300 • Operation 23