Filter
Top Products
Command ASCII command
(host to processor)
Response
(processor to host)
Additional description
Active lines
Specify a value
EX(ALIN} AlinX!*X(]
Set active lines to specified value for
active input.
Increment value
E+ALIN} AlinX!*X(]
Increase value.
Decrement value
E-ALIN} AlinX!*X(]
Decrease value.
View value
EALIN} X(]
Show active lines.
3:2, 2:2, 24:1 Film mode detect
Enable film detect
EX!*1FILM} FilmX!*X1)]
Turn film mode detection on.
Disable film detect
EX!*0FILM} FilmX!*X1)]
Turn film mode detection off.
View setting
EX!FILM} X1)]
View setting.
Picture Adjustments
Video mute
Unmute output
X7!*0B VmtX7!*00] Restore picture for output X7!.
Mute output video
X7!*1B Vmt X7!*01] Mute video only on output X7!.
Mute output sync and
video
X7!*2B Vmt X7!*02] Mute sync and video on output X7!.
Query output state
X7!B X4@] Queries mute status of output X7!..
Color
Specify a value
EX1%COLR} ColrX!*X1%]
Set color level to
X1%
.
Increment value
E+COLR} ColrX!*X1%]
Increase value.
Decrement value
E-COLR} ColrX!*X1%]
Decrease value.
View value
ECOLR} X1%]
Show color level.
Tint
Specify a value
EX1%TINT} TintX!*X1%]
Set tint level to
X1%
.
Increment value
E+TINT} TintX!*X1%]
Increase value.
Decrement value
E-TINT} TintX!*X1%]
Decrease value.
View value
ETINT} X1%]
Show tint level.
Contrast
Specify a value
EX1%CONT} ContX!*X1%]
Set contrast level to
X1%
.
Increment value
E+CONT} ContX!*X1%]
Increase value.
Decrement value
E-CONT} ContX!*X1%]
Decrease value.
View value
ECONT} X1%]
Show contrast level.
Brightness
Specify a value
EX1%BRIT} BritX!*X1%]
Set brightness level to
X1%
.
Increment value
E+BRIT} BritX!*X1%]
Increase value.
Decrement value
E-BRIT} BritX!*X1%]
Decrease value.
View value
EBRIT} X1%]
Show brightness level.
NOTE: X! = Input selection; 1 – 3
X( = Active lines — (±512 of the default value)
X1)
= 0 (off/disable), 1 (on/enable)
X1% = Picture adjustment; 0 to 127 (default 64) (Three digit response – 0 padding)
X4@ = Video Mute: 0 = Unmute video/sync, 1 = Mute video to black, 2 = Mute video and sync
X7! = Output Group Selection; 0 = All outputs (Default), 1 = Output 1 Only (HDMI), 2 = Output 2A and 2B Only
(HDMI & DTP), 3 = None
Annotator 300 • SIS Communication and Control 43