Filter
Top Products
Rear Panel
Features and
Connections
This section describes the rear panel features and how to connect the cables.
Rear Panel Features
The illustration below shows the rear panel features of the Annotator 300.
50/60 Hz
100-240VAC --A MAX
OVER DTP
DTP
HDBT
HDBT
REMOTEOUTPUTS
INPUTS
RS-232 IR
1 1UNIVERSAL HDMI DISPLAYPORT23 HDMI 2A HDMI 2B
TxRx GTxRx
CONTACT
LAN
RESET
USB
1
1
2
23
RS-232
TxRx G
SIG
OUT
LINK
A
D
EF
G
HIJK
L
BC
Figure 3. Annotator 300 Rear Panel Features
Power and video input connections Outputs and control connections
A AC power connector
B Universal analog 15-pin HD connector
C HDMI connector (HDMI/DVI inputs)
D DisplayPort connector
E HDMI connectors (2) (HDMI/DVI outputs)
F
RJ-45 connector (DTP or HDBaseT
output), selectable by switch
G
5-pole captive screw connector
(for DTP RS-232 and IR insert)
H
USB A connectors (2)
I
Reset button and LED
J
RJ-45 LAN connector
K
Remote RS-232 3-pole captive
screw connector
L
Remote contact closure 3-pole
captive screw connector
Power and Video Input Connections
A AC power connector — After connecting all input and output cables, plug a
standard IEC power cord from a 100 to 240 VAC, 50 Hz to 60 Hz power source
into this receptacle.
B
Universal analog connector — Connect high resolution computer-video input
signals to this 15-pin HD connector.
C
HDMI connector — Connect an HDMI or DVI (with an adapter) source to this
HDMI connector.
D
DisplayPort connector — Connect a suitable DisplayPort source to this
DisplayPort connector.
Annotator 300 • Rear Panel Features and Connections 8