Filter
Top Products
Display options
This section allows the user to choose on which outputs the cursor, menu, and the date
and time are shown. In addition the cursor and menu can be hidden after setting a fixed
time in seconds. The position of the date and time on the output screen can also be set.
To set the output to display the cursor, menu, and date and time, select each
output box as desired for OSD option.
To set the time to hide the displayed cursor and menu, select the Hide After
check box and enter a time in seconds (1-500).
To set the horizontal and vertical position of the date and time display, select each
Show check box as applicable, and enter the horizontal position in pixels (0-1920) and
the vertical position (0-1080).
Current OSD menus
This section allows the user to choose on which output which OSD menu is displayed,
and allows the user access to customize the OSD menu per output.
To set the output to display a selected the OSD, click the input Change... button. A
separate Customize On Screen Display window opens.
Figure 51. Customize OSD Window — Input Selection Menu
Select the check boxes as desired. To change the font, click the Font button and select
a font from the newly opened dialog box. Click Apply when all changes have been made.
Click Cancel to exit the OSD options procedure without any changes being made.
Annotator 300 • Product Configuration Software 89