Filter
Top Products
X2$ = EDID Table; 128 or 256 Bytes.
X2% = User presets — 1 to 16
X2^ = Input presets — 1 to 128
X2* = On-screen menu/cursor time-out (default = 10) /Output sync time-out
(default = 501-never),
0 = Menu/cursor never times out/output sync is instantly disabled with no active
input
1 to 500, in 1 second increments,
501 = output sync never times out
X2( = Executive mode status
0 = Off / disabled (default)
1 = Exe Mode 1 - Complete front panel lockout
2 = Exe Mode 2 - Partial front panel lockout (only input selection and Auto-Image
are still available
X3* = Overscan (Applied only to SMPTE [NTSC/PAL, 480p – 1080p] input rates)
0 = 0.0% (Default for RGB, HDMI, DisplayPort)
1 = 2.5% (Default for YUV Auto, RGBcvS, S-Video, and Composite video)
2 = 5.0%
X3( = Aspect ratio
1 = Fill (fills entire output raster) (default)
2 = Follow (follows input native aspect ratio)
X4) = Screen Saver modes
1 = Black screen (Default)
2 = Blue output
X4@ = Video Mute
0 = Unmute video/sync
1 = Mute video to black
2 = Mute video and sync
X4# = Auto-Image Threshold Value
0 (black) through 100 (white), default = 25
X4$ = HDCP status
0 = No sink or source device detected
1 = Sink or source detected with HDCP
2 = Sink or source detected but no HDCP is present
X4% = Video Switching Effect
0 = Cut
1 = Fade through Black
X4^ = HDCP Mode
0 = AUTO – HDMI output is only encrypted when viewing an encrypted input –
slower switching (default)
1 = ON – HDMI output is always encrypted regardless of input selection –
faster switching
Annotator 300 • SIS Communication and Control 37