Filter
Top Products
Settings Included Within Presets
Setting User Preset Input Preset
Horizontal and Vertical Start
X
Active Lines
X
Pixel Phase
X
Active Pixels
X
Total Pixels
X
Input Type
X
Film Detect
X
Brightness and Contrast
X X
Color and Tint
X X
Detail
X X
Image Size and Position
X X
Preset Name
X X
NOTE: User presets can be saved on one input resolution and recalled on a different
one. Input presets can only be recalled on the same input resolution that was present
when the preset was saved.
Input presets
There are 128 presets that are global to all inputs. The presets contain all of the settings
for an input when used with an upstream matrix switcher. Input presets save signal type,
signal sampling, and picture control settings.
To save an input preset:
1. From the Input Presets list, select the desired preset.
2. Click the Save Preset button. If the selected preset already has stored information
on it, the Presets dialog box opens. Click the Overwrite button to erase the previous
data and save the new settings. Click the Cancel button to return to the Image
Settings page.
To rename a preset:
1. In the Input Preset Name column, double-click an Input Preset Name.
2. Change the name as desired.
3. Press the <Enter> key to save the new name.
To recall an input preset:
1. From the Input Presets list, select the desired preset.
2. Click the Recall Preset button. The Presets dialog box opens.
3. Click the Recall button to recall the preset. Click the Cancel button to return to the
Image Settings page.
To clear a preset:
1. From the Input Presets list select the desired preset.
2. Click the Clear button. The Presets dialog box opens.
3. Click the Clear button to erase saved data. Click the Cancel button to return to the
Image Settings page.
Annotator 300 • Product Configuration Software 83