Filter
Top Products
AV Controls Panel
The AV Controls pane can be used to switch inputs, view active input and output status,
start an Auto-image instance, freeze the displayed image, and mute or unmute video and
audio signals.
Included in the panel is a summary of the current active input and output status, including
signal format and HDCP status, as well as AFL status.
NOTE: This panel can be hidden or revealed on any page by clicking on the arrow
button on the top right of the panel.
Figure 38. AV Controls Panel
NOTE: An open lock icon indicates that an input or output is not HDCP-encrypted.
A closed lock with a check mark icon indicates that an input or output is HDCP-
encrypted.
AV Inputs buttons
Click an AV Input button (1-3) to select that input. As the new input is selected, the
summary within the panel changes to reflect the new input and output status.
NOTE: The signal status indicators on the AV input buttons display green when a
signal is present on the corresponding input or gray when there is no signal present.
Auto-Image button
Clicking the Auto-Image button starts a one-time Auto-Image on the currently selected
input.
Annotator 300 • Product Configuration Software 74