Nortel Networks BCM1000 Stereo System User Manual


 
Chapter 4 Selecting the media bay modules for your system 59
Installation and Maintenance Guide
An example:
If you require 24 T1 digital lines, you need one DTM because a single DTM can handle 24
T1 lines (North America).
If you require two analog lines and 24 T1 digital lines, you need one CTM and one DTM.
BRI ISDN lines BRI 4 ISDN loops (8
lines)
______ BRI
Cordless handsets (DECT)
(selected profiles only)
DECT 4 ISDN loops
(requires a full
DS30 bus)
______ DECT
Note: Although the DTM supports several types of digital lines, you cannot connect
different types of lines to the same DTM.
You can add a maximum of three DTMs to your Business Communications Manager
system, and only on the BCM1000.
Tip: The BCM1000 can hold three media bay modules. If you require more than three
modules, a BCM1000e can be connected to support an additional six additional modules.
Table 7 Determining trunk module requirements (Continued)
Type of lines Number of lines
Type of media bay
module
Number of lines
per module
Number of modules
required