Filter
Top Products
Chapter 7 Setting media bay module DIP switches 105
Installation and Maintenance Guide
DECT switch settings
The DECT module supports a maximum of eight DECT radio base station connections. This
module occupies one full DS30 bus, which can support a maximum of 32 cordless handsets when
all eight base stations are deployed.
For detailed instructions about using the DECT module, refer to the Business Communications
Manager DECT Installation and Maintenance Guide.
Table 26 shows the settings for each DS30 bus, and the assigned dialing numbers (DNs).
Table 26 DECT module settings
Select
DS30
bus #
Select
offset
Set the switches
Use these
DNs on 2.5
and newer
systems
Use these
DNs on
updated 2.0
system
2
Custom DN range
Offset DS30
123456
02 0
on on on on on on
597-624
3
501-532
3
03 0
on on on on on
597-624
3
501-532
3
off
04 0
on on on on on
597-624
3
501-532
3
off
05 0
on on on on
597-624
3
501-532
3
off off
06 0
on on on on on
597-624
3
501-532
3
off
07
1
0
on on on on
597-624
3
501-532
3
off off
1
If your system is configured with a 3/5 DS30 split, DS30 07 is not available.
2
The extensions listed are based on a three-digit DN with a Start DN of 221. If your system has longer DNs
or a different Start DN, enter the range in the blank column.
3
If you need more DNs, use DNs in the 565 to 596 range. Ensure no other devices are assigned to these
DNs before you use them. Change the DN type field to ISDN and DECT.