Nortel Networks BCM1000 Stereo System User Manual


 
Chapter 2 Telephony hardware 47
Installation and Maintenance Guide
Figure 22 DECT faceplate with eight RJ45 connectors
Fiber Expansion media bay module
The Fiber Expansion media bay module (FEM) connects a maximum of six Norstar expansion
modules to the Business Communications Manager system. These connections provide a quick
way to upgrade a Norstar system to a Business Communications Manager system.
The front bezel of the FEM has six connectors. These connections are made using fiber cables
between the FEM module and the Norstar expansion modules. Beside each connector, an LED
lights when the fiber port is enabled.
The module has port status LEDs beside each port, as well as the usual power and status LEDs.
Figure 23 shows the front of the FEM module. Each port that is turned on consumes one DS30
bus.
Figure 23 FEM LEDs
Each RJ45 jack
can connect to
one base station
Power LED
Status LED
Run LED
Base station power LED
DECT media bay module
Front view
Port 4
Power LED
Status LED
Port 1
Port 5
Port 2
Port 6
Port 3