Filter
Top Products
Chapter 1 Introducing the Business Communications Manager 25
Installation and Maintenance Guide
BCM1000 LEDs
A line of 10 operational LEDs display on the face of the BCM1000. Refer to Figure 8. These
LEDs show the current state of various hardware components.
Figure 8 BCM1000 operational LEDs
These LEDs monitor:
• power ( )
• disk drive ( )
•system status ( )
• five PCI power indicators
• temperature ( )
•fans ( )
The LED states are described in Table 28 on page 117.
The Unified Manager contains a monitoring tool, that allows you to determine the current
condition of the LEDs from your computer. Refer to “Using the System Status Monitor to monitor
LEDs” on page 162.
Note: These LEDs correspond to the cards, not to the PCI slots.
For example, a WAN card uses only one PCI slot, but has the capacity for two
connections. In this case, both LEDs stay lit as long as a WAN card is present.
Operational LEDs
FanTemperaturPCI DevicesStatusDiskPower Temperature
1
PCI devices