Filter
Top Products
42 Chapter 2 Telephony hardware
P0609324 01
Station media bay modules
You install the station media bay modules in the BCM1000 or the BCM1000e. Station media bay
modules connect telephones and analog telecommunication devices to the Business
Communications Manager system.
Table 5 provides a list of the station modules that can be used on the Business Communications
Manager system:
Table 5 Station modules
Module type What it does Availability
DSM 16
“Digital Station media bay module”
DSM 32
“Digital Station media bay module”
Connects a maximum of 16 digital
telephones
Connects a maximum of 32 digital
telephones to the Business
Communications Manager system.
4X16
Combination 4-line CTM and
DSM16 (4x16) Media Bay Module
“4X16 media bay module”
Connects a maximum of four CLID lines
for a maximum of 16 digital telephones
Only available for North American
systems. This module can be
combined with CTMs on the same
DS30 bus. Also refer to “Caller ID
Trunk media bay module” on page
40.
ASM8
“Analog Station media bay
module” on page 44
ASM8+
(introduced with BCM 3.6
software)
Connects a maximum of eight analog
devices to the Business Communications
Manager system.
Connects a maximum of eight analog
devices, providing caller ID pass through,
message waiting indication, and
disconnect supervision at the telephone.
Module also provides ability to download
new firmware.
Only available for North American
systems. You can add a maximum of
two ASMs to your system.
North American and UK systems.