Filter
Top Products
5.6.7 Configure Sensor Flange Type
Display
Not available
ProLink II ProLink > Configuration > Sensor > Flange
ProLink III Device Tools > Configuration > Informational Parameters > Sensor
Field Communicator Configure > Manual Setup > Info Parameters > Sensor Information > Sensor Flange
Overview
Sensor Flange Type lets you store your sensor’s flange type in transmitter memory. This
parameter is not used in processing and is not required.
Procedure
1.
Obtain your sensor’s flange type from the documents shipped with your sensor, or
from a code in the sensor model number.
To interpret the model number, refer to the product data sheet for your sensor.
2. Set Sensor Flange Type to the appropriate option.
Configure device options and preferences
98 Micro Motion
®
Model 2700 Transmitters with Analog Outputs