UTStarcom PN-820 Headphones User Manual


 
86
C
H
4
SOUNDS
TIP
The UTStarcom PN-820 comes with a large standard set of ringtones
and sounds. You can also add your own as long as they are in the
correct format
.
CHANGE OR TURN SOUNDS ON OR OFF
Any sound can be toggled on or off at any time, or you can turn the
phone’s sound off altogether.
1
From the Home screen, press
the left soft key <
[Start].
2
Select Settings and press O [OK].
3
Scroll to Sounds and press O [OK].
4
Select the sound setting for a ring tone or an
event you wish to change and use
the left and
right Navigation Keys to alter settings. Press
None if you don’t want to hear a sound.
5
Repeat for each event, and press [Done].
For ring tones, you can use sounds in .wav, .mid, mp3, or .wma
file format
s.
When you select a sound, it plays. To hear it again, select
Menu
Play.
RESET DEFAULT
When you first purchase your phone, all the settings are pre-configured
and installed. At any time you can return your phone to the factory
default settings.
1
From the Home screen, Press
the left soft key <
[Start].
2
Select Settings and press O [OK].
3
Scroll to Security and press
O [OK].
4
Select Reset Default and press
O [OK].
5
Press # to continue and Select “Revert” to
reset default.
Reset Default erases all user data and initializes all settings to
the factory default mode.
SECURITY