216
C
H
8
RECEIVE BEAMED INFORMATION
Your phone can automatically receive beamed information, but you
must enable the phone to do so through the Connections menu.
1
In the Home screen, press [Start], select
Settings, press
O [OK].
2
Scroll to Connections and press O [OK].
3
Select Beam and press O [OK].
4
Check Receive incoming beams.
5
To receive beams by using Bluetooth, ensure
Bluetooth is turned on and that your phone is
discoverable and within close range.
6
Press Yes.
Once you select Receive incoming beams, your phone
automatically receives beams until you clear this check box.
Your phone can receive all types of beamed files, but you may
not be able to view all types of files on the phone. You may
need to copy some files to a PC for viewing.
TURN BLUETOOTH ON AND OFF
By default Bluetooth is turned off. If you turn it on, and then turn off your
device, Bluetooth also turns off. When you turn on your device again,
Bluetooth turns on automatically.
1
In the Home screen, press [Start], select
Settings, press
O [OK].
2
Scroll to Connections and press O [OK].
3
Select Bluetooth and press O [OK].
4
Use left and right Navigation Keys to turn On /
Off.
You can also turn off Bluetooth using Wireless Manager.
See also
Make your device discoverable
End a Bluetooth partnership
Create a Bluetooth partnership
Turn wireless power on or off
BLUETOOTH