Filter
Top Products
190
C
H
8
ACTIVESYNC
6
Select the check boxes for the types of
information items that you want to synchronize
with Exchange Server.
7
To change available synchronization settings,
select the type of information, and press [Menu]
select Settings and press O [OK].
8
To change the rules for resolving synchronization
conflicts, press [Menu] select Advanced and
press O [OK].
9
Press Finish.
CHANGE ACTIVESYNC SETTINGS
Once you set up synchronization using the Sync Setup wizard on the
PC, you can later change your synchronization settings:
• If you want to change ActiveSync settings for synchronizing with a
PC, use ActiveSync on the PC. For more information, see “Changing
the amount of information synchronized” in ActiveSync Help on the
PC.
• If you want to change ActiveSync settings for synchronizing with
Exchange Server, use ActiveSync on your phone, as described in
“Change settings for an information type.”
See also
Install and set up ActiveSync
Connect the phone
Change settings for an information type
SCHEDULE SYNCHRONIZATION AS ITEMS ARRIVE
You can schedule automatic synchronization between your phone and
Exchange Server every time an item arrives or is changed in Exchange
Server if your company is running Exchange Server with Exchange
ActiveSync, and after your first full synchronization with Exchange
Server.
1
On the phone Home screen, press [Start], select
ActiveSync and press
O [OK].
2
Press the right soft key > [Menu] select
Schedule and press O [OK].
3
Do one or both of the following:
4
In Peak times, select As items arrive. It’s more
cost-efficient to synchronize at regular intervals
when mail volume is high.
5
In Off-peak times, select As items arrive. This
can be more cost-efficient than synchronizing on
a regular schedule when mail volume is low.
6
Press [Done].
Before changing synchronization settings on the phone,
disconnect the phone from your PC.