UTStarcom PN-820 Headphones User Manual


 
170
C
H
6
GAMES
PLAY SOLITAIRE
1
Move any aces on the seven stacks to the four
card spaces at the top of the screen, and then
make any other available plays.
2
When you have made all available plays, press
Draw to turn over cards.
The top card that is face up on the deck is always available for
play.
BUBBLE BREAKER
OVERVIEW OF BUBBLE BREAKER
Bubble Breaker is easy to learn, yet difficult to master. The objective is
to align similar bubbles to form large blocks of bubbles before bursting
them. The more bubbles you have in the block before they are burst,
the greater number of points you will receive.
To burst a bubble, the bubble must be connected to other similar
bubbles on the playing board. If you press a bubble that is connected,
those connected bubbles will be highlighted and a text bubble will pop
up, displaying that block’s potential bubble points. Press the selection
again to burst the bubbles.
BREAKER BONUS
If you manage to leave fewer than five bubbles on the board you will be
rewarded with more points at the conclusion of the game.
Undo
Moves in Bubble Breaker can be undone. To take back the last move
you made, Press [Menu] Undo.
GAMES
START BUBBLE BREAKER
1
In the Home screen, press [Start], select Games,
then Bubble Breaker.
Set Bubble Breaker options
Bubble Breaker allows you to vary your playing
experience.
In Bubble Breaker, Press [Menu] [Options], and
select the following:
Play Sounds: Turns game sounds on or off.
Guest Mode: Enables guests to play without affecting the
statistics.
Style: Changes the style for new games as follows:
Standard: the default mode of play where there is a set
number of bubbles that will not increase.
Continuous
: whenever a vertical set of bubbles has been
burst and the remaining bubbles have shifted over to the
right, a new, randomly selected column of bubbles will
pop up on the left, allowing a game to be played for an
extended amount of time.
Shifter: when a set of bubbles has been burst, all
remaining bubbles to the top and left will shift down and to
the right.
MegaShift: a combination of the shifter and continuous
styles where bubbles will shift down and to the right while
empty columns will fill on the left.
Breakers: Changes the color of the bubbles from Colorful
to Grayscale.