Filter
Top Products
86
Creating a master tape
This process involves recording the finished song to your
recorder (cassette tape recorder, CD recorder, etc.) and
making a master tape.
Recording to a cassette tape
recorder (analog connection)
1. Connect the BR-864’s LINE OUT jacks to the cassette
tape recorder's input jacks.
fig.02-501a
2. Put the cassette tape recorder in record mode.
3. Press [PLAY] on the BR-864 and start the playback of
the recorded data.
Recording to a digital recorder
(digital connection)
1. Connect the BR-864’s DIGITAL OUT connector to the
digital recorder's input connector.
fig.02-501b
2. Set the digital recorder so it is ready to record digital
signals.
3. Put the digital recorder in record mode.
4. Press [PLAY] on the BR-864 and start the playback of
the recorded data.
Disabling digital copying
When recording from the BR-864 to a digital recorder, you
can prevent further digital copying of the master tape to any
other digital recorders.
1. Press [UTILITY].
2. Press CURSOR [ ] [ ] to move the cursor to “EDT,”
and press [ENTER].
fig.02-501d
3. Press CURSOR [ ] [ ] to move the cursor to
“DPRT,” and press [ENTER].
The Digital Copy Protect screen appears.
Cassette tape
Recorder
Digital Recorder
(CD Recorder etc.)