Filter
Top Products
28
Listening to the demo songs
Moving through a song using hours,
minutes, seconds, frames, or sub frames
Press [ ] [ ] to move the cursor to hours, minutes,
seconds, frames, or sub-frames display, and turn the TIME/
VALUE dial to change the current time in the song.
Moving through a song in measures or
beats
The current position’s measure– beat–clock are displayed at
the location “MEAS” (measure) in the display.
* For the demo songs, a Arrangement (p. 35, p. 90) has already
been created and it is set so that measure, beat, clock, and song
is properly synchronized.
Press [ ] [ ] to move the cursor to “measure” or “beat”
display, and turn the TIME/VALUE dial to change the
current measure or beat in the song.
* you cannot move the cursor to Clock (cannot be altered).
(4) Turning off the power
1. Make sure that playback of the song is stopped.
Always make sure that the recorder is stopped before
turning off the power to the BR-864. Turning off the
power while recording or playback is in progress may
result in the deletion of (song) data, mixer settings, and/
or effect patch data.
2. Turn off the power to each device in the reverse order
used for powering up (p. 25).
3. Turn the BR-864’s POWER switch off.