Filter
Top Products
17
Panel Descriptions
Front Panel
1. PEAK indicator
This indicator shows how strong the input level is at the
various input jacks (e.g., GUITAR/BASS and MIC).
This indicator lights at a level -6 dB lower than where sound
distortion occurs. Adjust the input sensitivity with the SENS
knob so that this indicator lights only occasionally, at those
moments when you play your guitar (or other instrument) at
its loudest.
2. SENS knob
Use this knob to adjust the sensitivity at the input jacks (e.g.,
GUITAR/BASS, MIC, and LINE).
3. INPUT SELECT buttons
Use these buttons to select the input source (input jack) that
you wish to record. The indicator of the selected button will
light. You can mute (silence) the input sound by pressing a
button that is lit.
GUITAR/BASS:
For selecting either guitar or bass use of the GUITAR/BASS
jack.
MIC:
For selecting either the MIC jack when a microphone is
connected, or the internal microphone.
* You can turn on and off the internal microphone. (p. 32)
LINE:
For selecting the LINE jack (stereo) for the line inputs, such
as keyboards or CD players.
SIMUL:
By pressing the GUITAR/BASS and MIC buttons
simultaneously, you can record from both inputs at the same
time.
* If the INPUT SELECT setting is changed, the insert effect
bank (p. 33, p. 56) changes automatically.
4. EFFECTS button
Use this button to turn on and off the insert effects (p. 33, p.
56) or call up the screen for editing the various settings.
1
10 11
36
12
13
14
15
2
3
4
7
9
5 6
8
16
18
19
17
22 21
23 24 25 26
27
28
29
31
30
3233
34 37
35
20