Filter
Top Products
164
Loading WAV/AIFF files in BR-864 tracks
(WAV/AIFF Import)
You can take WAV or AIFF files on your computer, such as
files created with audio software applications, and load them
to the BR-864’s tracks.
● Wave data in the following formats can be imported.
You cannot import wave data in other formats.
• WAV or AIFF format
• Mono or Stereo
• 8-bit or 16-bit
• Sampling Rate: 44.1 kHz
● Add the extension “WAV” to imported WAV files and
the extension “AIF” to imported AIFF files.
● Compressed WAV files or AIFF files cannot be loaded.
● Extremely short waveform data (less than
approximately 1 sec) cannot be loaded.
● The loop point settings within an AIFF file will be
ignored.
With Windows
1. Connect your computer and the BR-864 with a USB
cable.
2. Confirm that the recorder is stopped, then press [USB].
The USB function select screen appears.
3. Select “IMPORT” with the TIME/VALUE dial, then
press [ENTER].
fig.06-120d
4. Use CURSOR [ ] [ ] and the TIME/VALUE dial to
select the track to be loaded, then press [ENTER].
When loading to the tracks in mono
fig.06-122d
When loading to the tracks in stereo
* Select the track combination 1/2, 3/4, 5/6, or 7/8.
fig.06-121d
5. Use [CURSOR] and the TIME/VALUE dial to specify
the measure or position in the track from which
loading is to start, then press [ENTER].
fig.06-123d
The “BOSS_BR-864” (or “Removable Disk (*:)”) icon is
added to the computer.
fig.06-104
6. Copy the WAV or AIFF files you want to import.
1) Click the “BOSS_BR-864” (or “Removable Disk
(*:)”) icon.
2) Drag the imported WAV or AIFF file to the “USB”
folder.
* Only one file can be imported at a time in each import
operation. Do not drag and drop more than one file at a time.
fig.06-126d
When you have finished Copying the data, the Idling
screen returns to the display.
BOSS_BR-864
(
Ex.
)
Removable Disk (*:)