Roland BR-864 Stereo Equalizer User Manual


 
20
Panel Descriptions
27.
RHYTHM GUIDE
Here you can make settings for the Rhythm Guide function.
ARRANGE/PATTERN/OFF button:
Pressed to cycle the Rhythm Guide function through the
available selections: Arrangement Pattern Off.
TONE LOAD button:
This calls up the screen for the rhythm tones Tone Load
function.
RHYTHM GUIDE fader:
Adjusts the Volume of the Rhythm Guide.
PROGRAM button:
This calls up the screen for programming arrangements and
patterns.
RHYTHM PAD button:
This button switches the TRACK button, V-TRACK button,
and TAP button functions to rhythm input.
TAP (TEMPO) button:
By tapping this button, you can set the tempo for the rhythm
guide.
During creation of Rhythm Guide patterns (p. 96), the TAP
button is used to input rhythm instruments.
28.
USB button
Press this to call up the function for transferring data
between the BR-864 and your computer when the USB
connector is used.
29.
UTILITY button
This button calls up various functions offered by your BR-
864, such as track editing, song management, and memory
card operations.
30.
UNDO/REDO button
For undoing the last-performed recording or editing
operation and returning the data to its previous state. By
pressing this button once again, you can bring back the
canceled recording or re-execute the editing operation (p. 55).
31.
TIME/VALUE dial
You can use this dial to shift the current position within a
song (e.g., fast forwarding and rewinding). It is also used to
change the values of the various function settings.
32.
ENTER/YES button
Press this button to confirm a selection or a value being
entered.
33.
EXIT/NO button
Press this button to return to the previous screen or cancel
the last entry.
34.
CURSOR buttons
Press these buttons to move the cursor within the screen.
35.
Headphones jack ( )
Headphones (sold separately) are connected here. When
headphones are connected, the same output as that from
LINE OUT can be heard from the headphones.
* The headphone volume is adjusted with the MASTER fader.
36.
MIC (Internal microphone)
This microphone can be used for recording with the BR-864.
“Press the INPUT SELECT button of the instrument that you
want record” (p. 31)
“Turning off the internal microphone” (p. 32)
fig.00-202
37.
MEMORY CARD slot
This slot is where memory cards (CompactFlash) are inserted
when you want to save data. You cannot record unless you
have a memory card inserted here.
38.
Eject button
Press this button to eject the memory card.
37 38