Filter
Top Products
165
Loading WAV/AIFF files in BR-864 tracks (WAV/AIFF Import)
Section 6
7. Quit the connection to the computer.
In My Computer, right-click on the “BOSS_BR-864”
icon (or “Removable Disk (*:)” icon) to “Eject” the disk.
* If this procedure fails to eject the disk, use the procedure below.
1) Click the icon in the task tray, then click the
“Stop USB Disk—drive (*:)” message displayed
there.
fig.06-105a
2) Click [OK] in the “Safe To Remove Hardware”
dialog box that appears.
8. Press the BR-864’s [EXIT].
The WAV or AIFF file is imported.
The contents of the “USB” folder are automatically
deleted at the time the import is finished.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear. In this case, pressing
[ENTER] imports the WAV or AIFF file.
fig.06-106ad
Once the import is complete, you are returned to the
screen for specifying the import-source track/V-Track.
At this point, you can safely disconnect the USB cable
from the BR-864 and the computer.
9. Repeat Steps 4–8 as needed.
10. When you have finished importing the WAV or AIFF
file(s), press [EXIT] repeatedly to return to the Play
screen.
With Macintosh
1. Connect your computer and the BR-864 with a USB
cable.
2. Confirm that the recorder is stopped, then press [USB].
The USB function select screen appears.
3. Select “IMPORT” with the TIME/VALUE dial, then
press [ENTER].
fig.06-127d
4. Use CURSOR [ ] [ ] and the TIME/VALUE dial to
select the track to be loaded, then press [ENTER].
When loading to the tracks in mono
fig.06-129d
When loading to the tracks in stereo
* Select the track combination 1/2, 3/4, 5/6, or 7/8.
fig.06-128d
5. Use [CURSOR] and the TIME/VALUE dial to specify
the measure or position in the track from which
loading is to start, then press [ENTER].
Task Tray
Task Bar