Roland BR-864 Stereo Equalizer User Manual


 
184
Error Messages
ERROR! No File
Cause: The BR-864’s [EXIT] button was pressed
during the import of a WAV or AIFF file (p.
164), when there were no WAV or AIFF files
in the “USB” folder.
Solution: Copy the WAV or AIFF files that you want to
import to the “USB” folder.
Lack of Event!
Cause: It is not possible to execute Undo or Redo if
fewer than 200 events remain.
Solution: Perform the Song Optimize operation (p. 84).
Mastering Mode! Step disallowed.
Cause: The BR-864 is in Mastering Mode.
Solution: The attempted operation is not allowed.
No Card!
Cause: You have tried to operate the recorder, or
access the memory while the memory card
(CompactFlash) is not inserted, or is not
inserted properly.
Cause: The memory card has been removed after
selection of data on that memory card.
Solution: Turn off the BR-864, properly insert the
memory card, then turn the BR-864 back on.
No Song!
Cause 1: There are no songs on the memory card.
Solution 1: Create a new song (p. 30).
Cause 2: Incorrect data is in the song folder, or the
necessary data is not present.
Solution 2: Restore the data backed up on the computer to
the BR-864. In this case, restore each
“ROLAND” folder to the BR-864 (p. 158).
Power Down!
Cause: Internal power source voltage is below than
guaranteed workable range.
Solution: In case of using PSA adaptor:
Cable might be broken or adaptor itself might
be malfunctioning. Please contact Roland
Service or Roland authorized dealers.
In case of using batteries:
Please replace with new batteries (p. 22).
Protected!
Cause: You are attempting to write data to a song
that has protection switched on.
Solution: To write data to the song, switch Protect to
OFF (p. 85).
Set the Repeat!
Cause: Repeat A (Starting Point) and B (Ending
Point) is not set.
Solution: Set the Repeat A and B (p. 49).
Stop P.Trainer!
Cause: The operation you attempted cannot be done
while the Phrase Trainer (p. 139) is operating.
Solution: Press [PHRASE TRAINER] to turn off the
Phrase Trainer.
Stop Recorder!
Cause: The operation you attempted cannot be done
while the recorder is running (playing or
recording).
Solution: Press [STOP] to stop playback or recording.
Too Many Songs!
Cause: You are attempting to create more that 100
songs.
Solution: Erase unneeded songs (p. 83).
Unformatted!
Cause: The Memory card is not formatted by DOS.
Solution 1: Turn off the BR-864, properly insert the
memory card, then turn the BR-864 back on.
Solution 2: Initialize the card (p. 149).
Unsupported Card
Cause: The memory card (CompactFlash) or
MicroDrive inserted is not compatible with
the BR-864.
Solution: Use a memory card compatible with the BR-
864 (32 MB to 1 GB CompactFlash with a
power-source voltage of 3.3 V).
Unsupported Format!
Cause 1: The BR-864 cannot recognize or use the
format of the inserted memory card.
Solution 1: Insert a memory card initialized for use with
the BR-864 (p. 149).
Cause 2: You have attempted to load an incompatible
WAV or AIFF file or SMF to the BR-864.
Solution 2: Check the format of the WAV or AIFF file or
SMF.