Filter
Top Products
58
Using the insert effects
Edited effect settings are temporary. If you exit the Edit
Effect screen without saving the effect patch you
changed, “TMP” appears next to the indication of the
bank.
Be aware that if you select a new effect patch while
“TMP” is displayed, the altered effect patch is returned
to its original settings and the changes are lost.
Saving insert effects settings
(Write)
Follow the procedure below to enter a name (patch name) for
an effect that you’ve modified, and save it as a new effect
patch.
* You cannot save an effect patch during the recording or
playback of a song.
1. Entering the patch name.
* If you do not need to change patch name, go to “4.”
At the Edit Effect screen, press CURSOR [ ] [ ] to
move the cursor to “NAME,” and press [ENTER].
The Patch Name Setting screen appears.
fig.01-508d
2. Use [CURSOR] and the TIME/VALUE dial to enter the
patch name.
* Press [ENTER] to switch between uppercase and lowercase.
3. After you have completed entering the effect settings
and patch name as desired, press [EXIT] to return to the
screen (Effect Edit screen) two screens previous.
4. Press CURSOR [ ] [ ] to move the cursor to
“WRITE,” and press [ENTER].
fig.01-509d
5. Turn the TIME/VALUE dial to select the number to
which to write the new effect patch.
6. After you’ve selected the destination, press [ENTER].
After the save has been completed, you are returned to
the Edit Effect screen.
* During updating, “Keep power on!” appears in the upper line
of the display, while the lower line shows what is being
processed.