Filter
Top Products
18
Panel Descriptions
5. INPUT LEVEL knob
Use this knob to adjust the volume of the input source for
recording.
* If you use the INPUT LEVEL knob to turn down the volume
of the input source during recording, the sound will be
recorded in the audio track at a low volume, so that noise will
be more apparent when you raise the volume of the audio track
for playback.If you want to lower the sound of the input source
that you are monitoring, lower the volume with the MASTER
fader. To change the volume of the music being played back,
use the TRACK fader for the respective tracks.
6. TUNER button
Use this button to turn on and off the tuner (p. 137).
7. AUTO PUNCH
This button is used to make settings for the automatic punch
in/out function.
ON/OFF button:
This turns the auto punch-in/out function on/off. When this
is on, the button indicator will light.
IN button:
For setting the auto punch-in location. Press this button to set
the punch-in point. When set, the indicator on this button
will light. After the punch-in location is set, you can press
this button to automatically move to the punch-in location.
* Press this button while holding down the ON/OFF button to
clear the set punch-in location.
OUT button:
For setting the auto punch-out location. Press this button to
set the punch-out location at the current location in the track.
When set, the indicator on this button will light. After the
punch-out location is set, you can press this button to
automatically move to the punch-out location.
* Press this button while holding down the ON/OFF button to
clear the set punch-out location.
8. LOCATOR button
Use this button to store any location that you desire. Then, by
pressing this button, you can automatically move to that
location.
When a location is set, the indicator on this button will light
and you will jump to the location each time this button is
pressed.
* Press this button while holding down the AUTO PUNCH
ON/OFF button to clear the set location.
9. ZERO button
Moves you to the time location 00:00:000.0.
10.
REW button
The song will rewind while you hold down the button.
11.
FF button
The song will fast-forward while you hold down the button.
12.
REPEAT button
You can specify a region that you wish to hear, and hear it
repeatedly (p. 49).
This feature is useful if you want to repeatedly play back the
recording between the punch-in and out locations (p. 51)
until you are satisfied or use the phrase trainer (p. 139) to try
to copy a difficult phrase recorded from a CD or the like.
13.
STOP button
Stops recording or playback of the song.
14.
PLAY button
Plays back songs. When [REC] is pressed and the REC
indicator is flashing, press [PLAY] to start recording. During
recording or playback, the indicator on the button lights in
green.
15.
REC (Recording) button
This is the Record button. In addition to the Recording
operation, it is also used for manual punch-in/out. While in
recording standby, the indicator on this button flashes in red,
and during recording, it lights in red.
16.
AUDIO TRACK MIXER fader 1–4/5–8
For controlling the volumes of each track during playback.
* Hereafter, the AUDIO TRACK MIXER faders shall be
referred to as the “TRACK faders.”
17.
MASTER fader
Controls the overall volume of the BR-864.