Icom IC-7700 Stereo Amplifier User Manual


 
4-21
Operating PSK
A high-quality DSP-based PSK31 encoder/decoder is
built-in to the IC-7700. When connecting a PC key-
board (p. 2-6), PSK31 operation can be performed
without PSK software installed on your PC.
If desired, you can also use your PSK software; con-
sult the manual that comes with the software.
q Push a band key to select the desired band.
w Push to select PSK.
After PSK mode is selected, push and hold
for 1 sec. to toggle between PSK and PSK-R modes.
• “PSK” or “PSK-R” appears.
e
Push [F-3•DECODE] to display the decode screen.
The IC-7700 has a built-in PSK31 decoder.
r Tune to the desired signal with the main dial.
The signal is properly tuned when the radiated lines in
the vector tuning indicator narrow, as show in the exam-
ple below.
The radiated lines in the vector tuning indicator may be
displayed sporadically.
When a PSK signal is received, the water-fall display is
activated.
The water-fall display shows the signal condition within
the passband and a vertical line appears when a PSK
signal is received.
t Press [F12] of the connected keyboard to transmit.
• [TX] indicator lights red.
y Type from the connected keyboard to enter the
message that you want to transmit.
The typewritten contents are indicated in the TX buffer
screen and transmitted immediately.
The text color will be changed when transmitted.
Press one of [F1]–[F8] to transmit the TX memory con-
tents.
u Press [F12] of the keyboard to return to receive.
For your convenience
The transmission contents can be typed before being
transmitted.
q Perform the steps q to r above.
w Type from the connected keyboard to enter the
message that you want to transmit.
• The message is shown in the TX buffer screen.
e Press [F12] of the connected keyboard to transmit
the message.
The color of displayed text, in the TX buffer screen, will
be changed when transmitted.
•To cancel the transmission, press [F12] twice.
r Press [F12] of the keyboard to return to receive.
RTTY/PSK
RTTY/PSK
FFT scope
Vector tuning indicator
TX buffer screen
RX contents screen
Water-fall
Appears
[TX] indicator [RX] indicator
[AF] Main dial
Band keys
RTTY/PSK
F-3
DECODE
4
RECEIVE AND TRANSMIT
•Vector tuning indicator indication example
Tuned BPSK signal
BPSK/QPSK idle signal Unmodulated signal
Tuned QPSK signal