Icom IC-7700 Stereo Amplifier User Manual


 
4-10
DD
Contest number set mode
This menu is used to set the contest (serial) number
and count-up trigger, etc.
Setting contents
q During CW mode operation, push [F-3•KEYER] to
select memory keyer screen.
w Push to select memory keyer menu, then
push [F-3•001] to select contest serial number set
mode.
e Push [F-1•Y] or [F-2•Z] to select the desired set
item.
r Set the desired condition using the main dial.
Push and hold [F-4•DEF] for 1 sec. to select the default
condition or value.
Contest number set mode screen t Push twice to normal screen.
EXIT/SET
EXIT/SET
Main dial
F-1
F-2
EXIT/SET
F-4
DEF
4
RECEIVE AND TRANSMIT
This item sets the numbering system used for contest
(serial) numbers— normal or short morse numbers.
Normal : Does not use short morse numbers
(default)
190ANO : Sets 1 as A, 9 as N and 0 as O.
190ANT : Sets 1 as A, 9 as N and 0 as T.
•90 NO : Sets 9 as N and 0 as O.
•90 NT : Sets 9 as N and 0 as T.
This selects which of the four memories will contain
the contest serial number exchange. The count-up
trigger allows the serial number to automatically in-
crement after each complete serial number exchange
is sent.
• M1, M2, M3 and M4 can be set. (default: M2)
This item shows the current number for the count-up
trigger channel set above.
Rotate the main dial to change the number, or push
and hold [F-3•001CLR] for 1 sec. to reset the cur-
rent number to 001.
Number Style
Normal
Count Up Trigger
M2
Present Number
001