Icom IC-7700 Stereo Amplifier User Manual


 
3-8
Operating mode selection
SSB (USB/LSB), SSB data (USB data/LSB data), CW,
CW reverse (CW-R), RTTY, RTTY reverse (RTTY-R),
PSK, PSK reverse (PSK-R), AM, AM data, FM and FM
data modes are available in the IC-7700. Select the
desired operation mode as follows.
To select a mode of operation, push the desired mode
switch momentarily. Push the switch again to toggle
between USB and LSB, CW and CW-R, RTTY/RTTY-
R and PSK/PSK-R, AM and FM, if desired. Push and
hold the switch for 1 sec. to toggle between RTTY and
RTTY-R, PSK and PSK-R, if desired.
See the diagram below left for the order of selection.
Microphone signals are muted when data mode is
selected.
• Selecting SSB mode
Push to select USB or LSB.
USB is selected first when above 10 MHz; or LSB is se-
lected first when below 10 MHz operation.
(USB is selected when 5 MHz band is selected for the
USA version.)
After USB or LSB is selected, push to toggle
between USB and LSB.
• Selecting CW mode
Push to select CW.
After CW is selected, push to toggle between
CW and CW reverse mode.
• Selecting RTTY/PSK mode
Push to select RTTY or PSK.
After RTTY or PSK is selected, push to toggle
between RTTY and PSK.
After RTTY or PSK is selected, push and hold
for 1 sec. to toggle between RTTY and RTTY reverse,
or, PSK and PSK reverse mode, respectively.
Selecting AM/FM mode
Push to select AM or FM.
After AM or FM is selected, push to toggle be-
tween AM and FM.
• Selecting DATA mode
After USB, LSB, AM or FM is selected, push
to select USB data, LSB data, AM data or
FM data mode, respectively.
• After data mode is selected, push to toggle be-
tween regular voice and data mode.
After data mode is selected, push and hold for
1 sec. to select data 1, 2 and 3 in sequence.
DATA
DATA
DATA
AM/FM
AM/FM
RTTY/PSK
RTTY/PSK
RTTY/PSK
CW
CW
SSB
SSB
3
BASIC OPERATIONS
RTTY/PSK AM/FM DATA
SSB CW
USB
CW
AM
Push mode switch
for 1 sec.
Push mode switch
momentarily.
LSB
CW-R
RTTY-R RTTY PSK PSK-R
FM
USB
LSB
AM
FM
USB-D1
LSB-D1
AM-D1
FM-D1
USB-D2
LSB-D2
AM-D2
FM-D2
USB-D3
LSB-D3
AM-D3
FM-D3