Filter
Top Products
12-17
12
SET MODE
Sets the external keypad for voice message trans-
mission capability ON and OFF.
See page 2-7 for the equivalent circuit of an external
keypad and connection.
•ON: Pushing one of external keypad switches,
transmits the desired voice message contents
during a phone mode operation.
• OFF : External keypad does not function. (default)
External Keypad (VOICE)
OFF
Sets the external keypad for keyer memory transmis-
sion capability ON and OFF.
See page 2-7 for the equivalent circuit of an external
keypad and connection.
•ON: Pushing one of external keypad switches,
transmits the desired keyer memory contents
during CW mode operation.
• OFF : External keypad does not function. (default)
External Keypad (KEYER)
OFF
■ Others set mode (continued)
Transceive operation is possible with the IC-7700
connected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, op-
erating mode, etc. on the IC-7700 automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
CI–V Transceive
ON
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-7700’s address is 74h.
When 2 or more IC-7700’s are connected to an op-
tional CT-17
CI-V LEVEL CONVERTER, rotate the main dial
to select a different address for each IC-7700; the
range is 01h to 7Fh.
CI–V Address
74h
Sets the CI-V data transfer rate. 300, 1200, 4800,
9600, 19200 bps and “Auto” are available. (default:
Auto)
When “Auto” is selected, the baud rate is automati-
cally set according to the data rate of connected con-
troller.
CI–V Baud Rate
Auto