Filter
Top Products
7-6
■ Recording a message for transmit
To transmit a message using the voice recorder, record
the desired message in advance as described below.
The IC-7700 has digital voice memories for transmis-
sion, up to 4 messages and a total message length of
up to 99 sec. can be recorded.
DD
Recording
qPush several times to close a multi-func-
tion screen, if necessary.
wPush [F-2•VOICE] to call up the voice recorder
screen.
ePush to select voice recorder menu.
rPush [F-2•MIC REC] to select the voice mic. record
screen.
tPush [F-1•Y]or[F-2•Z] to select the desired mes-
sage.
yPush and hold [F-4•REC] for 1 sec. to start record-
ing.
•“ ” indicator appears.
• Speak into the microphone without pushing [PTT].
• Previously recorded contents are cleared.
• Audio output from the internal speaker is automatically
muted.
uWhile speaking into the microphone with your nor-
mal voice level, adjust the [MIC] control so that the
[MIC-REC LEVEL] indicator reads within 100%.
iPush [F-4•REC] momentarily to stop recording.
• The recording is terminated automatically when the re-
maining time becomes 0 sec.
oPush twice to exit the voice recorder
screen.
DD
Confirming a message for transmit
qPerform the steps q to r as “D Recording” above.
wPush [F-1•Y]or[F-2•Z] to select the desired mes-
sage.
ePush [F-3•PLAY] to playback the recorded contents.
•“ ” indicator appears.
rPush [F-3•PLAY] again to stop playback.
• Playback is terminated automatically when all of the
recorded contents in the message are played.
tPush twice to exit the voice recorder
screen.
EXIT/SET
≈PLAY
EXIT/SET
●REC
EXIT/SET
EXIT/SET
F-4
REC
F-1
∫
F-2
√
Appears Adjust [MIC] control so that this
indicator reads within 100%.
F-3
PLAY
F-1
∫
F-2
√
7
VOICE RECORDER FUNCTIONS