Filter
Top Products
7-8
■ Sending a recorded message
qPush several times to close a multi-func-
tion screen, if necessary.
wSelect a phone mode by pushing or .
ePush [F-2•VOICE] to call up the voice recorder
screen.
• If the receive voice message appears, push [F-7•T/R] to
select TX message (T1–T4).
rPush the desired message switch, [F-1•T1] to
[F-4•T4], momentarily to transmit the contents.
•The transceiver transmits automatically.
•“ ” indicator appears and the memory timer
counts down.
•You hear the transmitted message from the speaker as
the default. This can be turned OFF in voice set mode.
(p. 7-9)
tPush the selected message switch, [F-1•T1] to
[F-4•T4], again to stop, if desired.
• The transceiver returns to receive automatically when all
of the recorded contents in the message are transmit-
ted.
yPush twice to exit the voice memory
screen.
✔
For your information
When an external keypad is connected to [EXT KEY-
PAD], the recorded message, T1–T4, can be transmit-
ted without opening the voice recorder screen.
See page 2-7 for details.
DD
Transmit level setting
qCall up the voice recorder screen as described as
above.
wPush [F-6•TX LEV.] to select the voice memory
transmit level set condition.
ePush the desired message switch, [F-1•T1] to
[F-4•T4], momentarily to transmit the contents.
•The transceiver transmits automatically.
•“ ” indicator appears and the memory timer
counts down.
rRotate the main dial to adjust the transmit voice
level.
• Push and hold [F-7•DEF] for 1 sec. to select the default
condition.
tPush to return to the voice recorder
screen.
EXIT/SET
SEND
EXIT/SET
SEND
AM/FMSSB
EXIT/SET
F-1
T1
F-2
T2
F-3
T3
F-4
T4
F-7
T/R
EXIT/SET
Appears
Counts down
Main dial
EXIT/SET
F-6
TX LEV.
F-7
DEF
7
VOICE RECORDER FUNCTIONS