Filter
Top Products
6-6
■ Split frequency operation
Split frequency operation allows you to transmit and
receive in the same mode on two different frequencies.
Split frequency operation is performed using 2 fre-
quencies on the main and sub readouts.
The following is an example of setting 21.290 MHz for
receiving and 21.310 MHz for transmitting.
qSet 21.290 MHz (USB) in VFO mode.
wPush momentarily, then push and hold
for 1 sec.
• The quick split function is much more convenient for se-
lecting the transmit frequency. See the next section for
details.
• The equalized transmit frequency and “ ” appear
on the LCD.
• [SPLIT] indicator lights.
•“TX” appears to show the transmit frequency readout.
eSet the transmit frequency to 21.310 MHz in the fol-
lowing way.
➥ Rotate the main dial while pushing [XFC].
• The transmit frequency can be monitored while push-
ing [XFC].
rNow you can receive on 21.290 MHz and transmit
on 21.310 MHz.
To change the transmit and receive frequencies, push
to exchange the main and sub readouts.
✔
CONVENIENT
• Direct shift frequency input
The shift frequency can be entered directly.
qPush .
wEnter the desired shift frequency with the digit keys.
•1 kHz to 1 MHz can be set.
• When you require a negative shift direction, push
in advance.
ePush .
• The shift frequency is input in the sub readout and the
split function is turned ON.
[Example]
To transmit on 1 kHz higher frequency:
- Push , then .
To transmit on 3 kHz lower frequency:
- Push , , then .
• Split lock function
Accidentally releasing [XFC] while rotating the main
dial changes the receive frequency. To prevent this,
use both the split lock and dial lock functions to change
the transmit frequency only. The split lock function can-
cels the dial lock function while pushing [XFC] during
split frequency operation.
The dial lock’s effect during split frequency operation
can be selected in the set mode for both receive and
transmit frequencies; or only the receive frequency.
(p. 12-13)
SPLIT
7
3
GENE
•
F-INP
ENT
SPLIT
1.8
1
F-INP
ENT
SPLIT
GENE
•
F-INP
ENT
A/B
SPLIT
A=B
SPLIT
Main dial
[SPLIT] indicator
SPLIT
A/B A=B
XFC
6
FUNCTIONS FOR TRANSMIT
• When the split function ON
• When [XFC] is pushed
• The split frequency operation is ready